Watersafe Water Lead Test Kit WS-207 (Single)

Description

Take 10 minutes to protect your family from the damaging effects of lead poisoning.

Everyone living in areas affected by lead contamination should test their water. Our Watersafe^®Lead Test Kit can detect dissolved lead at levels below the EPA Action Level of 5 parts per billion (ppb).

Features & Benefits:

• EPA Standards
• Results in Minutes
• Fast, Accurate, Easy to Use

Contents:

• (1) Lead Test Strip
• (1) Test Vial
• (1) Pipette

Contains: 1 test

Total Test Time: approx. 10 minutes

How to Use:

The Watersafe Lead Test can detect dissolved lead at levels below the EPA Action level of 5 ppb (parts per billion). A water sample can be tested in 3 simple steps with this test kit:

Open Lead packet and take out all contents. The foil packet contains a one test strip, test vial, a dropper pipette, and a desiccant (to be discarded).

1. Using dropper, place water sample into test vial. Swirl vial gently for one minute. Place on a flat surface.
2. Place test strip into the test vial, with arrows pointing DOWN. Wait 10 minutes. Do not disturb strips or vial during this time. Lines will appear on the strip.
3. Take the strip out of the vial and read result.

Negative: Bottom line (next to number 1) is darker than the top line (next to number 2).

Positive: Top line (next to number 2) is darker than the bottom line (next to number 1), or lines are equally dark.

If a test strip shows a positive result, your water sample may contain lead at a toxic level. Take appropriate action.