Total Chlorine Water Test 0-10ppm (50 Strips)

Description

Ideal to test all drinking water sources easily and accurately for Total Chlorine. The test strips measure in small increments, allowing accurate results even for low levels of total chlorine.

• Simple Dip-Wait-Read Testing Method
• Test strips are stored in a plastic container with a detailed colour chart to protect them
• Ideal for quick and reliable testing of water
• Accurate results in less than one minute
• This product is safe and easy to use since there are no chemicals to mix, an MSDS is not required

The test strips are very reliable and have been laboratory checked to make sure they produce accurate results. They are also used in various industries, including food processing, water filtration, sanitising & medical industry to monitor cleaning of some medical devices.

Suitable for: fresh water, including water from taps, wells, springs, boreholes, ponds as well as rain water as well as food processing environments, water filtration & sanitising

Contains: 50 strips

Testing Levels:

• Method A: 0, 0.1, 0.2, 0.5, 0.8, 4.0, 10.0 ppm (mg/l)
• Method B: 0, 0.05, 0.1, 0.15, 0.2, 0.5, 1.0 ppm (mg/l)

Total Test time: 35 seconds

How to Use:

1. Dip one strip into a 250ml water sample for 5 or 10 seconds.
2. Remove and wait 30 seconds then match to the colour chart. Complete colour matching within 15 seconds.

For best results, please follow instructions carefully.

Please note: not suitable to test pool & spa water.

General description: For semi-quantitative determinations. Detection method: colorimetric. Fast, simply dip and read indicator paper. Consists of a plastic strip with attached sealed test paper. Compare colour change of test paper with fields of equal size on colour chart provided.Please note: Store in a cool, dry (below 32°C) place and away from excess heat and direct sunlight. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids.Made in USA