SimplexHealth Copper Test Strips 0-2ppm (25 strips)

Description

These water quality test strips are ideal to test well water, tap water or stream water.

• Simple Dip-Wait-Read Testing Method
• Test strips are stored in a plastic container to protect them
• Ideal for quick and reliable testing of water
• Accurate test results within 2 minutes
• Test strips feature easy-to-read colours
• This product is safe and easy to use since there are no chemicals to mix, an MSDS is not required
• No interferences have been identified

Measurements within the ranges of 0 to 2 ppm (mg/l), which permits the measurement of typical copper levels found in well, tap, and stream water. The UK maximum contaminant level for Copper in tap water set by DWI/DEFRA is 2.0 mg/l (= 2ppm).Accurate water quality test results for home, lab, and on-site have never been this easy.Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds as well as rain waterContains: 25 test stripsDescription: Copper Cu⁺¹ / Cu⁺² – Free / DissolvedTesting Levels: 0, 0.05, 0.1, 0.2, 0.4, 1.0, 2.0 ppm (mg/l)How to Use:

1. Dip one test strip into a 200ml room temperature sample for 15 seconds.
2. Remove test strips and shake once.
3. Wait 30 seconds, then match to colour chart. Adjust the Dip Time according to the Water Temperature – click here to view our Temperature Conversion Chart.

No interferences have been identified.Please note: Store in a cool, dry (below 32°C) place and away from excess heat and direct sunlight. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids.Made in USA